摘要：水性水性丙烯酸航标漆性能主要依靠配方设计的合理性，松动性的颗粒能给在寿命长短的基面上能给处置合格的基准。混泥土处置的问题再大场地上应该对性能和施工有一定的了解。 Abstract: water-based acrylic beacon paint performance mainly depends on the rationality of the formula design, loose sexual particles can give can give disposal on the lifespan of qualified benchmarks. Concrete disposal problem again big ground should the performance and construction have a certain understanding. 水性丙烯酸航标漆的施工处理 水性丙烯酸航标漆施工前要用喷砂或电磨机清除表面的突出物，这样在破坏了毛细孔的前提下增加附着面积。最好使用吸尘器将表面的沙粒、杂质，灰尘等等清除干净，在确保平整的表面才能给进行下一步的施工。对待有较多凹陷、坑洞的外表，需要用环氧树脂砂浆、腻子找平修补，这样才能给确保下一步施工的安全无误。 Water-borne acrylic beacon paint to use sandblasting before construction or electric grinder protrusions on the surface of the clear, so that on the premise of damage to the wool stoma increase the adhesion area. It is best to use a vacuum cleaner will be on the surface of the grains of sand, impurities, dirt and so on clean, in ensuring the smooth surface to the next step of construction. Treat more sag, hole appearance, need to repair with epoxy resin mortar, putty leveling, so you can to make sure it is the next step of construction safety. 水性丙烯酸航标漆的施工环境 确保前期工作处理之后，水性丙烯酸航标漆施工前一定要观察施工环境。水性产品对施工温度要求十分严格，因为较冷的环境下水性产品是无法稀释的。所以处理表面达到不起砂、清洁无油、坚硬、平整，并且达到一定的粗糙度之后就可以选择适合的环境和能给成膜的温度进行施工了。 To ensure early after work, water-based acrylic beacon paint before construction must observe the construction environment. Water-based products is very strict with the construction temperature, because of the cold water environment products cannot be diluted. The surface processing can't reach the sand, clean oil, hard, smooth, and reach a certain roughness can choose the suitable environment and can give a film-forming temperature in construction. |